Panasonic SC-ALL2 Operating Instructions

Operating Instructions <Setup>
Wireless Speaker System
SC-ALL2
Model No.
Thank you for purchasing this product. Please read these instructions
carefully before using this product, and save this manual for future use.
This manual contains quick set up information. More detailed
instructions are contained in "Operating Instructions <Full version>"
which can be downloaded at the bottom right links.
Configure with Smartphone/Tablet
3
Go to wireless Select
settings on "ALL2
your
* This can sometimes take 1
minute to appear.
smartphone
or tablet.
Settings
Wi-Fi Settings
NOTE:
• If this operation does not work
correctly, please repeat it several
times.
• If you encounter an error message
asking you to reconfigure your
TM
router to WPA2
refer to your router's manual or
contact your service provider for
instructions on how to do this.
4
Download App
Download the free
"Panasonic Music
Streaming" app
[iOS] : App Store
TM
[Android] : Google Play
1
Name your device
_AJ"*. e.g. Kitchen, Lounge or
whatever you would like
it to appear.
NOTE: If this page is not
automatically displayed, type
security, please
"http://172.19.42.1/" into your
internet browser URL address
field.
5
Stream your music
For details on the app, refer to the site below. (These sites are in English only.)
[iOS] : http://panasonic.jp/support/global/cs/audio/app/music_streaming/ios/
[Android] : http://panasonic.jp/support/global/cs/audio/app/music_streaming/android/
2
Connect Turn On Unit
Do not connect
the LAN cable.
Select your network.
(enter password if needed)
1 Touch and hold [NET] and [1] for
more than 4 seconds, "-- --" on
the display will start blinking.
2 Touch [NET] within 10 seconds,
the network indicator starts
blinking blue/red.
Wait until the network
indicator stops blinking
blue/red...
...and starts to blink
only blue slowly*.
Wait a few seconds and...
Network Reset Further Support
If you require further help
please visit
http://panasonic.jp/support/
global/cs/audio/ALL/
index.html
or scan the QR code for FAQs,
video tutorials and Operating
Instructions<Full version>
(This site is in English only.)
* The blinking in blue starts
after approximately
1 minute. If the blinking in
blue does not start, perform
a network reset (see below -
Network Reset).
...you're connected!*
* After a short wait, your smartphone/
tablet should be automatically
®
reconnected to your Wi-Fi network.
In case you are not reconnected
automatically, please re-select your
Wi-Fi network from the settings /
Wi-Fi settings menu on your device.
The network indicator
lights up solid blue.
RQT0A31-1B
F0515HA2055