Makita T221D Instruction Manual page 8

Safety system
Make sure all safety systems are in working
order before operation. The tool must not
operate if only the trigger i s pulled or if
only the safety lever is pressed against the
wood. It must work only when both actions
are performed. Test for possible faulty
operation with
a
tool unloaded and pointed
well away from yourself or any bystanders.
NOTE :
There is a possibility that the tool may operate for an instant when only the trigger is
pulled. This does not indicate
a
problem. If this occurs, point the tool well away from
yourself or any bystanders. Release and pull the trigger again to make sure the safety
systems are in working order.
Loading staples
CAUTION:
Always remove the battery cartridge before loading the staples into the
tool.
Press the plate spring on the rear of the
backward.
sub-magazine and slide the sub-magazine
Plate spring
Load staples into the main magazine with
staple ends facing up
as
illustrated
a t
right.
8