Advertisement
Replacing the saw blade
Do
not replace with saw blade bigger than
To
replace the saw blade, grip the outer
flange with a wrench
(22).
then remove the
hex bolt with a socket wrench. The blade
comes
off
easily.
4-310
''
.
MAINTENANCE
CAUTION:
Fig.
10
Always be sure that the tool is switched off and unplugged before attempting
to
perform
inspection or maintenance
Replacing carbon brushes
Remove and' check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in the holders Both
L
A
Limit mark
carbon brushes should be replaced at
the same time, Use only identical carbon
brushes
*'
Fig.
11
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
Brush holder cap
Screwdriver
Fig. 12
To maintain product SAFETY and RELIABILITY, repairs. any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts
9
Advertisement
