Makita 9217SPC Instruction Manual page 7

ASSEMBLY
1. Grip
1. Lock nut
2. Abrasive disc
3. Rubber pad
1
2
1. Lock nut wrench
2. Wrench
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (auxiliary handle)
003446
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip on the tool securely. The side grip can be
installed on either side of the tool, whichever is convenient.
1
Installing or removing abrasive disc
003455
Mount the rubber pad onto the spindle. Fit the abrasive disc
1
on the rubber pad and screw the lock nut onto the spindle.
2
3
To tighten the lock nut, hold the spindle with the wrench so
003456
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
To remove the disc, follow the installation procedure in
reverse.
7