Advertisement
Operation
A finishing sander is generally used to re-
move only a small amount of material
a t
a
time. Since the quality of the surface
is
more important than the amount of stock
removed, do not bear down on the sander.
Keep the base flush with the material
a t
all
times. Undue pressure may damage the
paper and shorten tool life.
CAUTION :
0
Do not block motor vent with your finger
or hand.
*Never run the tool without paper. You
may seriously damage the pad.
0
You can put
a
high polish on furniture or
other fine surfaces by using
a
cloth under
the sander.
6
Advertisement
