Advertisement
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1. Hold the tool firmly with both hands.
2. Do not leave the tool running. Operate the tool only when hand-held.
3.
This tool has not been waterproofed, so do not use water on the working
surface.
SAVE THESE INSTRUCTIONS.
4
Advertisement
