Advertisement
Installing or removing router bit
CAUTION :
Always be sure that the tool
i s
switched off and unplugged before installing or removing
the bit.
Insert the bit all the way into the collet
cone and tighten the collet nut securely
with the two wrenches.
To remove the bit, follow the installation
procedure in reverse.
Tighten
t
CAUTION :
Do not tighten the collet nut without inserting a bit, or the collet cone will break.
Adjusting depth
of
cut
Place the tool on
a
flat surface. Loosen the
screw securing the stopper pole.
Loosen the lock lever and lower the tool
body until the bit just touches the flat
surface. Tighten the lock lever to lock the
tool body.
5
Advertisement
