Functional Description; Depth Adjustment - Makita 6827 Instruction Manual

FUNCTIONAL
DESCRIPTION
2
3
1. Pointer
2. Locator
3. Front cap
4. Adjusting ring
1mm (3/64")
1mm (3/64")
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Depth adjustment

002614
1
When you wish to drive self drilling screws, etc., adjust the
depth as follows. Turn the locator to adjust the depth.
4
Initially, adjust the locator to create a distance of approxi-
002622
mately 1 mm (3/64") from the tip of the front cap (which
works in conjunction with the locator) to the base of the
screw head. One full turn of the locator equals 1 mm (3/64")
change in depth.
After adjusting the locator, turn the adjusting ring so that the
6" mark is aligned with the pointer on the gear housing. Drive
a trial screw into your material or a piece of duplicate mate-
rial. If the depth is not suitable for the screw, continue adjust-
002623
ing until the proper depth setting is obtained.