Installation Requirements; Tools And Parts - Maytag MET3800XW1 Installation Instructions Manual

INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Tools needed:
@
Flat-blade screwdriver
#2 Phillips screwdriver
Adjustable or open-end
wrench 9/16" (14 mm)
Level
4 ='miR
(102 mm)_
Wood block
Ruler or measuring tape
Optional tools:
Flashlight
Parts supplied:
Bucket
NOTE: Remove parts package from the washer basket.
Check that all parts were included.
Front leveling feet with nuts (2) Shipping strap (Not in parts bag.
See "Remove Shipping Strap.")
Drain hose
Silver double-wire hose clamp
Tin snips (new vent
installations)
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
1/4" nut driver Wire stripper
(recommended)
Caulking gun and compound
(new vent installations)
Utility knife