Care And Cleaning; Burner Caps; Stainless Steel - GE ZGU366NPSS Owner's Manual

Hide thumbs Also See for ZGU366NPSS:
Table of Contents

Advertisement

Care and Cleaning
Professional
Rangetops
Dua/-f/afTle
The burner consists of three parts: the burner
base, burner head and burner cap. The burner
stacked
bUFFleFShead
and burner cap can be lifted off, making
them easy to clean.
A CAUTION: Do NOT OPERATE
THE
BURNER WITHOUT ALL BURNER PARTS IN PLACE,
Surface burners should be cleaned
routinely,
especially
after bad spillovers, which could clog
the slots and holes in the burner heads.
The electrode
is located at the rear of each
burner.
Do not attempt
to disassemble
or clean
around any burner while another
burner is on. An
electric shock may result.
__
Burner Cap
Burner
Head
Burner Base
Electrode
Cleaning
Lift off burner parts only when cool. Wash in hot,
soapy water. You may use a plastic scouring
pad
to remove burned-on
food particles.
To remove
burned-on
food, soak the burner
heads in a solution
of mild liquid detergent
and
hot water for 20-30
minutes.
For more stubborn
stains, use a plastic scouring
pad or toothbrush.
If the spill goes inside the burner head assembly,
wash it under running water and shake to
remove excess water.
After Cleaning
Before replacing the burner parts, shake out
excess water and then dry them thoroughly.
To replace
the burner
parts:
Make sure that the burner parts are replaced
in
the correct
location.
1. Replace the burner head on top of the burner
base, making sure that the hole in the burner
head is properly aligned with the electrode
in the burner base. A small gap between
the
base and head is normal.
2. Place the burner cap on top of the burner
head. Make sure that the burner cap is
properly seated on the burner head.
To remove
the burner
parts:
1. Turn all controls
OFF before removing
any
burner parts.
2. When cool, you may lift off the burner grates,
burner caps and burner heads for easier
cleaning,
Do not remove the burner
bases.
Burner cap properly seated
Burner cap not properly seated
Stainless
stee/
surfaces
Do not use a steel-wool
pad; it will permanently
scratch the surface,
To clean the stainless steel surface, use
warm
sudsy water or a stainless steel cleaner.
Always wipe the surface
in the direction
of the
grain. Follow the cleaner
instructions
for cleaning
the stainless steel surface.
A bottle of stainless steel cleaner
is provided with
the rangetop.
To inquire about purchasing
stainless steel
appliance
cleaner, please call our toll-free
number,
800.626.2002
or visit GEAppliances.com.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents