Baffle Grease Filters; Drip Trays - GE ZV42 Owner's Manual

Care and Cleaning
Professional Island Range Hood
Baffle grease
filters and
drip trays
Island hood models have reusable metal grease
baffles and drip trags.
The metal baffles channel grease released bg
foods on the cooktop into the drip trags. The
baffles also help prevent flaming foods on the
cooktop from damaging the inside of the hood.
For this reason, the baffles must ALWAYS be in
place when the hood is used. The grease baffles
and drip trags should be cleaned once a month,
or as needed.
To clean the grease baffles and drip trags,
drain and wipe all excess grease with a drg paper
towel. Soak them and then swish them around
in hot water and detergent. Don't use ammonia
or ammonia products because theg will darken
the metal. Do not use abrasives or oven cleaners.
Rinse, shake and let them drg before replacing.
Theg mag also be cleaned
in an automatic dishwasher.
To remove:
Grasp both baffle knobs on each filter and
pull them up, forward and out. Grasp the
drip trag and carefullg lift it up and out of
the hood track.
To replace the drip trags:
1. Place and seat the drip trag into the
hood track.
2. Slide them left or right until all trags are
side-bg-side in place in the track.
To replace the baffles:
1. Hold the baffle at the bottom bg one of
the knobs.
.
.
Place the other end of the baffle against
the inside front of the hood.
Slide it up and push the bottom end back until
it firmlg seats into place.
Drip Trag
Track
_ DripTrag
Drip Trag Replacement
Baffle Replacement