Shiplapping - Makita 1100 Instruction Manual

Shiplapping
To make
a stepped cut as shown a t the right, use the edge
fence.
Draw a cutting line on the workpiece. In-
sert the edge fence into the hole in the
front of the tool. Align the blade edge with
the cutting line.
Adjust the edge fence until it comes in con-
tact with the side of the workpiece, then
secure i t by tightening the screw.
You may wish o add to the I
ngth of the
fence by attaching an extra piece of wood.
Convenient holes are provided in the fence
for this purpose.
NOTE :
When planing, move the tool with the edge fence flush with the side of the workpiece.
Otherwise uneven planing may result.
Max. shiplapping depth is
20 mm (3/4").
9