Functional Description; Adjusting Depth Of Cut; Bevel Cutting - Makita CIRCULAR SAW 5005BA Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Clamping screw
1
1. Bevel scale plate
2. Clamping screw
A
1. Base
8
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Adjusting depth of cut

001338
CAUTION:
• After adjusting the depth of cut, always tighten the
1
clamping screw securely.
Loosen the clamping screw on the depth guide and move the
base up or down. At the desired depth of cut, secure the
base by tightening the clamping screw.
For cleaner, safer cuts, set cut depth so that no more than
one blade tooth projects below workpiece. Using proper cut
depth helps to reduce potential for dangerous KICKBACKS
which can cause personal injury.

Bevel cutting

001356
Loosen the clamping screw on the bevel scale plate on the
front of the base. Set for the desired angle (0° - 45°) by tilting
accordingly, then tighten the clamping screw securely.
2
Sighting
001373
For straight cuts, align the A position on the front of the base
B
with your cutting line. For 45° bevel cuts, align the B position
with it.
1