Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
HandA-Accessories.com
INSTALLATION
INSTRUCTIONS
PARTS LIST
Alarm System:
P/N 08E51-S0X-100
Control unit
LED
Push nut
2-Pin connector
Disarm switch
Window label
3-Pin connector
Nut, 12 mm
Washer
Owner's Manual
2 Washer-screws, 4 x 30 mm
© 1998 American Honda Motor Co., Inc - All Rights Reserved.
Accessory
ALARM SYSTEM
Alarm Attachment Kit:
P/N 08E55-S0X-100F
Alarm harness
Sub-harness
Control unit bracket
12 Wire ties
Wire tie with clip
Relay bracket
4-Pin relay
Ground bolt
Washer-bolt, 6 x 12 mm
Flange nut
Fuse labels
AII 19610 (9810)
Y0505-D
Application
1999 ODYSSEY (EX)
Publications No.
All 19610
Issue Date
OCT 1998
1 of 12
08E55-S0X-1F01-91
Advertisement
Related Manuals for Honda Odyssey 1999
Summary of Contents for Honda Odyssey 1999
- Page 1 Nut, 12 mm Washer Ground bolt Owner’s Manual Washer-bolt, 6 x 12 mm Flange nut 2 Washer-screws, 4 x 30 mm Fuse labels 1 of 12 © 1998 American Honda Motor Co., Inc - All Rights Reserved. AII 19610 (9810) Y0505-D 08E55-S0X-1F01-91...
-
Page 2: Tools And Supplies Required
FUSE BOX alarm, and if the sensitivity is too low, the security ALARM HARNESS system may not work even if glass is broken. 2 of 12 AII 19610 (9810) © 1998 American Honda Motor Co., Inc - All Rights Reserved. -
Page 3: Installation
Remove the kick panel by pulling it out toward you. PLASTIC STEERING WHEEL SCREW TILT LEVER CLIP KICK PANEL DOOR OPENING LOWER STEERING TRIM COLUMN SCREWS 3 of 12 © 1998 American Honda Motor Co., Inc - All Rights Reserved. AII 19610 (9810) - Page 4 BLUE TAPE connector and the antenna lead). (Remove.) VEHICLE HARNESS 3-PIN CONNECTOR (GRAY) ANTENNA LEAD ALARM HARNESS 3-PIN CONNECTOR RADIO CONNECTOR RADIO BOLT 4 of 12 AII 19610 (9810) © 1998 American Honda Motor Co., Inc - All Rights Reserved.
- Page 5 ALARM HARNESS GROUND WIRE GROUND BOLT VEHICLE GROUND BOLT (Discard.) HOOD OPENER 5 of 12 © 1998 American Honda Motor Co., Inc - All Rights Reserved. AII 19610 (9810)
- Page 6 4 x 30 mm washer-screws. ABS UNIT CONTROL UNIT BRACKET CONTROL UNIT RELAY BRACKET (reused) 4 x 30 mm WASHER-SCREWS 6 of 12 AII 19610 (9810) © 1998 American Honda Motor Co., Inc - All Rights Reserved.
- Page 7 Remove all burrs. 20. Plug the 22-pin connector of the alarm harness into the control unit. CONTROL UNIT 22-PIN CONNECTOR ALARM HARNESS 7 of 12 © 1998 American Honda Motor Co., Inc - All Rights Reserved. AII 19610 (9810)
- Page 8 • First drill a pilot hole with a 5.5 mm bit, then finish with a 12 mm bit. • Remove all burrs. 8 of 12 AII 19610 (9810) © 1998 American Honda Motor Co., Inc - All Rights Reserved.
- Page 9 3-pin connector on the disarm switch. lower the lock. Lock. DISARM SWITCH BLACK WIRE ALARM HARNESS 3-PIN 3-PIN CONNECTOR CONNECTOR DISARM SWITCH BLUE WIRE 3-PIN CONNECTOR 9 of 12 © 1998 American Honda Motor Co., Inc - All Rights Reserved. AII 19610 (9810)
- Page 10 STOPPER panel. Remove the kick panel by pulling it out toward you. PLASTIC SCREW FUSE BOX KICK PANEL GLOVE BOX DOOR OPENING TRIM 10 of 12 AII 19610 (9810) © 1998 American Honda Motor Co., Inc - All Rights Reserved.
- Page 11 ALARM HARNESS 3-PIN CONNECTOR WIRE TIES SUB-HARNESS 3-PIN CONNECTOR SUB- HARNESS CONNECTOR CLIP DUMMY CONNECTOR (Discard.) WIRE TIES RIGHT FUSE BOX VEHICLE HARNESS 11 of 12 © 1998 American Honda Motor Co., Inc - All Rights Reserved. AII 19610 (9810)
- Page 12 42. Push the clip on the alarm harness 2-pin connector into the hole in the control unit bracket. CONTROL UNIT BRACKET HOLE 2-PIN CLIP CONNECTOR 12 of 12 AII 19610 (9810) © 1998 American Honda Motor Co., Inc - All Rights Reserved.