Wireless Connectivity; Wireless Signal Strength; Restore The Factory Settings And Password - NETGEAR WNDR4500 User Manual

Wireless Connectivity

If you are having trouble connecting wirelessly to the router, try to isolate the problem.
Does the wireless device or computer that you are using find your wireless network?
•
If not, check the Wireless LEDs on the front of the router. It should be lit. If it is not, you
can press the WiFi On/Off button on the back of the router to turn the router's wireless
radio back on.
If you disabled the router's SSID broadcast, then your wireless network is hidden and
does not show up in your wireless client's scanning list. (By default, SSID broadcast is
enabled.)
Does your wireless device support the security that you are using for your wireless
•
network (WPA or WPA2)?
If you want to view the wireless settings for the router, use an Ethernet cable to connect a
•
computer to a LAN port on the router. Then log in to the router, and select Wireless see
(Basic Wireless Settings
Note: Be sure to click Apply if you make changes.

Wireless Signal Strength

If your wireless device finds your network, but the signal strength is weak, check these
conditions:
Is your router too far from your computer, or too close? Place your computer near the
•
router, but at least 6 feet away, and see whether the signal strength improves.
Is your wireless signal blocked by objects between the router and your computer?
•

Restore the Factory Settings and Password

This section explains how to restore the factory settings, changing the router's administration
password back to password. You can erase the current configuration and restore factory
defaults in two ways:
Use the Erase function of the router (see
•
Use the Reset button on the back of the router. See
•
restore the factory settings and the router fails to restart, or the green Power/Test LED
continues to blink, the unit might be defective. If the error persists, you might have a
hardware problem and should contact technical support at
http://www.netgear.com/support.
N900 Wireless Dual Band Gigabit Router WNDR4500
on page 24).
Troubleshooting
on page 68).
Erase
Factory Settings
102
on page 105. If you