Cisco ASR 9000 Series Configuration Manual page 173

Implementing MPLS Traffic Engineering
Command or Action
Step 8
exit
Example:
RP/0/RSP0/CPU0:router(config-ospf-ar)# exit
RP/0/RSP0/CPU0:router(config-ospf)#
Step 9 mpls traffic-eng router-id type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf)# mpls
traffic-eng router-id Loopback0
Step 10 Use the commit or end command.
Step 11
show mpls traffic-eng topology
Example:
RP/0/RSP0/CPU0:router# show mpls traffic-eng
topology
Step 12 show mpls traffic-eng link-management advertisements
Example:
RP/0/RSP0/CPU0:router# show mpls traffic-eng
link-management advertisements
Related Topics
How MPLS-TE Works, on page 116
Build MPLS-TE Topology and Tunnels: Example, on page 252
OL-28381-02
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Building MPLS-TE Topology
Purpose
Exits the current configuration mode.
Sets the MPLS-TE loopback interface.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
(Optional)
Verifies the traffic engineering topology.
(Optional)
Displays all the link-management advertisements for the
links on this node.
157