Connecting Web Viewer - Samsung SRN-473S User Manual

starting web viewer

ConneCTing weB viewer

1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
You need to connect network 2 before you can access the web
`
M
viewer.
"192.168.2.200" is set to IP by default.
`
You must have specified the IP address in "Network > Interface".
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
`
For more information, refer to "Network Configuration > DDNS". (Page 101)
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
By default, the ID and password for the web viewer are "admin"
`
J
and "4321", and these should be changed during the installation
wizard stage.
The installation wizard can only be used the first time the product is
used.
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
`
using the default wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect personal information and to prevent the damage of the
`
information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a
password.
It allows up to 10 simultaneous access including the Admin and general users.
`
M
Password of the Admin and general users can be changed in <User> menu of the NVR.
`
Normal users should have set <Webviewer> under <Restriction on Network Access> to Use before connecting to the
`
Web Viewer. (Page 63)
All settings are applied by the NVR's settings.
`
3. The plugin installation confirmation pop-up window will
appear.
116_ starting web viewer