Table of Contents
Advertisement
3.
Align the front end holes of a rack rail
pair to the 1U space.
4.
Drive in two screws on the outer holes to
secure the front end.
5.
Find the rear 1U space that corresponds
to the front 1U space where you
attached the rail.
6.
Drive in two screws on the outer holes to
secure the rear end.
7.
From the rack front, find the
corresponding 1U space for the second rail pair.
8.
Repeat steps 3–6 to attach the second rail pair.
3.4
Mounting the server to the rack
To mount the server to the rack:
1.
Align the server rails with the rack rails.
2.
Push the server all the way into the rack.
3-4
Chapter 3: Installation options
Advertisement
Table of Contents
