Connecting To The Dmx512 Network - Philips SL ParBlazer 100 UV Installation & User Manual

SL ParBlazer 100 UV

3. Connecting to the DMX512 Network

Basic DMX512 installation consists of connecting multiple SL ParBlazer 100 UVs together (up to 32 luminaires) in
"daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector
on the first SL ParBlazer 100 UV. Another cable runs from the other DMX connector on the first unit to a DMX
connector on the next SL ParBlazer 100 UV (or DMX512 device to be controlled).
Note: For more information on DMX512 networking and systems, refer to
page 1 . For SL ParBlazer 100 UV DMX Mapping, refer to
DMX512
(from console or
control device)
DMX512/
RDM Input
Figure 4: SL ParBlazer 100 UV DMX512 Input / Output Connections
DMX512 (
to second luminaire)
DMX512 Signal
Common (Drain)
Note: Remaining pins on each connector are not used.
Figure 5: SL ParBlazer 100 UV- DMX512 Connections
Luminaire
"DMX CONTROL" on page 13
out from first
DMX512
luminaire or DMX512 controlled
DMX512 Conections
XLR Pin
1
2
DMX512-
DMX512+ 3
Installation & User's Manual
DMX512
/
RDM Output
"Additional Resources for DMX512" on
.
(out to the next
device)
Color
Black
White
Red
Connecting to the DMX512 Network 7