Parts Identification - Sony DVF-L350 Operating Instructions Manual

Parts Identification

qf
qd
qs
qa
0
9
8
7
a Viewfinder connector
Connect this to the VF connector on the camera.
b Viewfinder cable
c Eyecup
d Diopter adjuster
Turn the adjuster to adjust the diopter so that the image is
clearly visible.
e Eyepiece
Raise or remove this according to the situation.
f Viewfinder barrel
Raise or remove this according to the situation.
g Tally indicator
This is located at the top of the unit's internal LCD screen.
This lights or blinks red or turns off according to the
situation.
Lit: The camera/camcorder is recording.
Blinking: An error or warning has occurred.
For details on the status of the indicator, refer to the
operating instructions for your camera/camcorder.
h FOCUS MAG (magnified display) button
Magnifies the height and width of the image (x2) for
easier focus adjustment. This does not affect the camera's
output signal.
The display switches between magnified display and
normal display with each press of the button.
4
Parts Identification
i MIRROR switch
Inverts the right and left of the image.
Set this to ON when viewing the image with the VF barrel
and eyepiece removed.
ON: Inverts the right and left of the image.
OFF: The image is not inverted.
1
j CONTRAST adjustment knob
2
Turn the knob to adjust the contrast on the screen. This
3
does not affect the camera's output signal.
4
k Rotation arm
5
Rotate the arm to adjust the position of the unit.
6
l Arm lock knob
Use this when adjusting the forward/backward position
and height of the unit.
m L-arm
Attach this to the viewfinder shoe of the camera.
You can also slide the unit forward, backward, left, and
right to adjust its position.
n Slide stopper
Prevents this unit from detaching from the camera when
sliding it left and right.