Control Access To The Usb Drive - NETGEAR R6400 User Manual

The setup is complete and the Mac automatically schedules a full back up. You can back
up immediately if you want.

Control Access to the USB Drive

You can specify the device name, workgroups, and network folders for your USB device.
To specify the USB access settings:

1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Functions > ReadySHARE Storage.
5. Specify access to the USB storage device:
• Network Device Name. This is the name used to access the USB device connected
to the router. The default is readyshare.
• Workgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name is displayed here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
• Access Method. Select the check boxes for the access methods that you want:
- Network Connection. Enabled by default.
AC1750 Smart WiFi Router
Share USB Storage Devices Attached to the Router
75