Linksys PAP2 Configuration Manual page 5

Hide thumbs Also See for PAP2:

G726-24 Enable—no

G726-32 Enable—no

G726-40 Enable—no

DTMF Tx Method—AVT

Line 1 Configuration Page – Bottom

11. In the Dial Plan section, change the value of the Dial Plan field to match the dialing pattern used in

your country (where you are using the Landose service).

For US calls, insert "1" as the first digit. For non-US calls, insert "011" before the rest of the phone

number. For information on customizing your dial plan, refer to the PAP2 manual.

12. To save these settings, click the Submit All Changes button.

13. On the Line 1 and Line 2 configuration pages of the Linksys PAP2, please change the following

settings in the Supplementary Service Subscription section from "Yes" to "No":

Three Way Call Serv

Three Way Conf Serv

Attn Transfer Serv

Unattn Transfer Serv

Landose Configuration Guide for the Linksys PAP2

Page 4

Table of Contents