Connecting External Antennas; Using The Scart Av Output - Pioneer XV-DV333 Operating Instructions Manual

09 Other connections

Connecting external antennas

For an external AM antenna, use 5–6 meters of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Indoor
antenna
(vinyl-coated
wire)
For an external FM antenna, Use a PAL
connector to hook up an external FM antenna.

Using the SCART AV output

There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
• Use a commercially available SCART cable
to connect the AV CONNECTOR to your TV.
TV
IN OUT
MCACC
6
MIC L
CENTER
6
L
R
AUDIO LINE 1
6
R
6
SURROUND
SUB
WOOFER
XV-DV333/340
Note
1 SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment).
30
En
Outdoor antenna
AM
LOOP ANTENNA
5–6m
PAL connector
OPTICAL IN
AUDIO
LINE 2
FM AM
ANTENNA
AV CONNECTOR UNBAL 75Ω LOOP ANTENNA
AC IN
VIDEO
OUT
VIDEO
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV/monitor.
Pin
Assignment
No.
1 Audio R OUT
2 Audio R IN
3 Audio L OUT
4 GND (audio)
5 GND (video)
6 Audio L IN
7 B OUT
8 Status
9 GND (video)
10 No connection
11 G OUT
1
Pin
Assignment
No.
12 No connection
13 GND (video)
14 GND (video)
15 R or C OUT
16 BLANK OUT
17 GND (video)
18 GND (video)
19 Video or Y OUT
20 No connection
21 GND (video)