Dell E525w User Manual page 92

Redial Attempts
Redial Delay
Junk Fax Setup
Remote Receive
Remote Receive Tone
Fax Header
Fax Header Name
Fax Number
Fax Cover Page
DRPD Pattern
Sent Fax Forward
Fax Forward Number
Forwarding E-mail Address
Server Type
Host Address (IP Address or
DNS Name)
Port Number
Login Name (if required by
host)
Login Password
Re-enter Password
Name of Shared Directory
Subdirectory Path (optional) Leave blank if there is no second or third-level folder.
92
Dell™ Printer Configuration Web Tool
Specifies the number of redial attempts to make when the destination fax number is busy. If you
enter 0, the printer will not redial.
Specifies the interval between redial attempts.
Sets whether to reject faxes sent from unwanted numbers by accepting faxes only from the fax
numbers registered in the Phone Book.
Sets whether to receive a fax by pressing a remote receive code on the external telephone.
Specifies the remote receive code in two digits to start Remote Receive.
Sets whether to print the information of sender on the header of faxes.
Sets the name of sender to be printed on the header of faxes. Up to 30 alphanumeric characters
can be entered.
Sets the fax number of the printer to be printed on the header of faxes.
Sets whether to attach a cover page to faxes.
Sets the DRPD setting from Pattern 1 to Pattern 7. DRPD is a service provided by some
telephone companies.
Off Does not forward received faxes.
Forward Forwards incoming faxes to the fax number specified in Fax Forward Number
below without printing.
Print and Prints and forwards incoming faxes to the fax number specified in Fax Forward
Forward Number below.
E-mail only Forwards incoming faxes to the e-mail address specified in Forwarding E-mail
Address below without printing. The faxes are converted to a PDF file and sent
to the destination as an e-mail attachment.
E-mail and Prints and forwards incoming faxes to the e-mail address specified in Forwarding
Print E-mail Address below. The faxes are converted to a PDF file and sent to the
destination as an e-mail attachment.
Forward to Forwards incoming faxes to the server specified in from Server Type through
Server Subdirectory Path (optional) below without printing. The faxes are converted
to a PDF file and stored in the destination.
Fwd to Server Prints and forwards incoming faxes to the server specified in from Server Type
and Print through Subdirectory Path (optional) below. The faxes are converted to a PDF
file and stored in the destination.
Specifies the fax number of the destination to which incoming faxes will be forwarded.
Specifies the e-mail address of the destination to which incoming faxes will be forwarded.
Specifies the type of destination to which incoming faxes will be forwarded. To forward to an FTP
server or a shared folder on a networked computer, select Server (FTP) or Computer (SMB)
respectively, and then specify the settings from Host Address (IP Address or DNS Name) through
Subdirectory Path (optional) below.
Enter the host name or IP address of an FTP server or a computer.
Enter the port number.
Enter the user account name that has access to the shared folder on your computer or FTP server.
Enter the password corresponding to the above login name.
Re-enter your password.
Enter the share name (Windows OS) or folder name (Macintosh OS) of the shared folder. You do
not need to specify this setting for an FTP server.