Installing The Usb Driver - Panasonic KX-NT700 Operating Instructions Manual

Installing the USB Driver

1.
Connect the included USB Cable to the USB port
(A) of the unit, and to the USB port of the computer.
A
Notice
•
Only use the included USB cable to connect
the unit and the computer.
•
A USB driver setup wizard is displayed. Click
[Next] to install the USB driver.
If the setup wizard is not displayed, set
"Operation Mode" on the unit to "Peer to
Peer" or "IP-PBX". See "Operation Mode" in
the unit's Operating Instructions for more details
on setting the operation mode.
2.
Select [Install the software automatically
(Recommended)] and then click [Next].
•
A dialogue box may be displayed that indicates
the software has not passed Windows logo
testing. This is normal. The software will not
cause any difficulties with your operating
system. Click [Continue Anyway] to proceed
with installation.
3.
Click [Finish].
Document Version 2010/02
USB
Operating Instructions for Conferencing Phone Manager
Installing the USB Driver
9