Section
C_O--=.p_e_ra_t_in----=9=---t_h_is_u_n_i_t
~)
a
Setting the angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
•
Initially, this function is set to on.
•
Touch MULTI ANGLE on the DVD setup
menu to turn angle icon display on.
• To turn the angle icon display off, touch
MULTI ANGLE again.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a 1V aspect
of 4:3. Be sure to select the correct 1V aspect
for the display connected to REAR MONITOR
OUTPUT.
• When using a regular display, select either
LETTER BOX or PAN SCAN. Selecting
16: 9
may result in an unnatural picture.
•
If you select the 1V aspect, the unit's dis-
play changes to the same setting.
•
Touch TV ASPECT on the DVD setup
menu to select the TV aspect.
Touch TV ASPECT repeatedly until the desired
1V aspect appears in the display.
•
16: 9 - Wide screen picture
(16:9)
is dis-
played as it is (initial setting)
• LETTER BOX - The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
• PAN SCAN - The picture is cut short at the
right and left of the screen
_Notes
•
When playing discs that do not specify
PAN SCAN, playback is with LETTER BOX
even if you select PAN SCAN setting. Confirm
whether the disc package bears the
116:
91
LB
1
mark. (See page 13.)
•
Some discs do not enable changing of the TV
aspect. For detai Is, refer to the disc's instruc-
tions.
Setting the parental lock
Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set the par-
ental lock to your desired level.
•
When you set a parental lock level and then
playa disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
You need to have registered a code number for
playing back discs with parantallock.
1
Touch NEXT on the DVD setup menu.
2
Touch PARENTAL.
3
Touch 0 to 9 to input a four digit code
number.
• To cancel the inputted numbers, touch
C.
4
Touch ENTER.
The code number is set, and you can now set
the level.
S
Touch any of 1 to 8 to select the desired
level.
The parental lock level is set.
• LEVEL 8 - Playback of the entire disc is pos-
sible (initial setting)
• LEVEL 7 to LEVEL 2 - Playback of discs for
children and non-adult-oriented discs is
possible
• LEVEL 1 - Playback of discs for children
only is possible
_Notes
•
We recommend to keep a record of your code
number in case you forget it.
• The parental lock level is recorded on the disc.
Look for the level indication written at the disc
package, included literature or on the disc it-
self. Parental lock of this unit is not possible if
a parental lock level is not recorded in the
disc.
En
00