Accessories; Technical Data; Features - Black & Decker KD400 Original Instruction

ENGLISH
This guarantee is offered as an extra benefit and is
additional to the customers statutory rights.
AFTER SALES SERVICE FOR THE BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide after sales service
through our company operated service centres and
concessionaries on the Channel Islands and Isle of Man.
It is our aim to offer excellent service, fast repairs,
extensive parts availability and full accessory support.
The use of other than genuine Black & Decker
accessories and parts may damage or reduce the
performance of your Black & Decker product and may
also endanger the user. The terms and conditions of
the warranty may also be effected.
THE AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should be
totally satisfied with their Black & Decker product and
after sales service, but if help or advice is needed
please contact the local Black & Decker service centre
manager who will be happy to help. Full details of our
unique after sales service can be obtained from any of
our Black & Decker service centres.

ACCESSORIES

The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.

TECHNICAL DATA

The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
Note: This user manual also covers catalogue numbers
ending in K, G or A. Refer to your carton for details of
your product.

FEATURES

1. On/off switch
2. Speed control
3. Lock-on button
4. Side handle
5. Chuck jaws
6. Chuck
7. Hammer/drill switch
8. Forward/reverse switch
6
2/8
7
6 •
5
4 •
Your drill includes some or all of these features:
• The on/off switch is used to operate your drill in all
modes of operation.
• The variable speed control provides optimal control
of your drill for a wide range of tasks.
• On two-speed drills, the speed switch permits
selection of the appropriate drilling speed.
• The lock-on button provides continuous operation
of your drill.
• The side handle (where provided) gives a secondary
gripping position for your drill.
• Your drill can operate as a hammer drill or as a
rotary drill depending on the setting of the hammer/
drill switch.
• The forward/reverse switch controls the direction of
rotation when your drill is used as a screwdriver, or
when clearing a jammed drill bit.
FITTING THE DRILL BIT (KEYLESS CHUCKS)
Proceed as follows:
Disconnect the plug from the electricity supply.
in the jaws of the chuck. Hold the rear section of the
chuck while tightening the front section. Twist the two
sections firmly in opposite directions to securely grip
the drill bit.
•
•
•
•
While holding the
rear section of
the chuck, rotate
the front section
until the jaws of
the chuck are
sufficiently open.
Insert the drill bit
1
3