JVC AV-48WP30 User Manual page 51

Your Television has three kinds of screen: SPLIT (2 channels), POP (4 channels), and INDEX
(12 channels)
Activate the Spli'i-Screen option by pressing
SPLIT
on "rhe remote control.
-'_-- Two channels (or input) will now appear onscreen. The
channel (or input) you were watching before pressing
press Sfxrr again.
it-Screen functions will not work with locked channels or channels blocked by V-Chip
ngs limits. A grey screen will display instead.
- The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of
46Op, 720pand 108Oi from the component terminal and HDCP terminal.
e After you press the SELECT button, and select SPLIT SCREEN, if you don? operate, the
MAIN CHANNEL SCREEN will be automatically selected about 8 seconds later.
----_-. . . ..~ ;,~"
You can exchange the channel (or input) displayed in Ihe Splil scroert window ior lhe main
screen image by pressing SWAP button.
No&: This function will not work with SPLIT screen.
e FREEZE button causes Ihe screen to change to Ihe split-screen display with the still
picture displayed on the right. In order lo return to the nortnal display, press the FREEZE button
once again.
ate: This function will not worlk with POP screen.
With SELECT, you can select the picture (channel) while viewing POP or SPLIT screen. When
you press SELECT button, the channel number on the top will be highlighled. Each press of
SELECT will shift the channel.
You can display Ihe one picture on screen by pressiny ENTER while using MULTI SCREEN
Function. Press SELECT or highlight the channel number before pressing ENTER.