JVC AV-48WP30 User Manual page 15

Your AV-48Wp30 television is I-IDTV and SDTV-Ready. This means it can display High
Definition television images when connected to a digital television receiver*. DTV Decoders are
available separately. For best image yuality, we recommend using a DTV Decoder which uses
Component Video (Y, PB, PR) Output to connect to the television. The diagram below shows
how to connect a DTV Decoder with using the television's Component Video-in jacks.
I) Connect Green cable
OLIN
from the DTV Decoder "Y" Video Output, in to TV "Y" Component
Input.
2) Connect Blue cable
out
from the DTV Decoder "FE? Video Output, in to TV 9%" Component
Input.
3) Connect Red cable out from the DTV Decoder "PR" Video Output, in to TV PR" Component
Input.
4) Connect White Audio cable out the DTV Decoder Left Audio Output, in to TV Left Audio
Input.
5) Connect Red Audio cable out the DTV Decoder Right Audio Output, in to TV Right Audio
Input.
sure yap us? %ke sake
sierra ~~~~~ and io
. For instance, if you use
put 2.
* Green, blue and red are the most common colors for Component Video cables. Some models
may vary colors, please consult the user's manual for your DTV Decoder for more
information.
0 Be careful not to confuse the red Component Video cable with the red audio cable. It is best
to complete one set of connections (Audio or Video) before starting the other to avoid acci-
dentally switching the cables.
, 108Oi and 720~ signal formats using the
lay 1080~ signat. For f-ligh Definition (IIDTV) picture