HIKVISION DS-2 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2 Series
  6. User manual
HIKVISION DS-2 Series User Manual

HIKVISION DS-2 Series User Manual

5-inch smart speed dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
5-inch Smart Speed Dome

User Manual

UD.6L0201D1080A01
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2 Series

Summary of Contents for HIKVISION DS-2 Series

  • Page 1: User Manual

    5-inch Smart Speed Dome User Manual UD.6L0201D1080A01 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 2 The updates will be added into the new version of this manual. We will readily improve or update the products or procedures described in the manual. 1000001030531 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 3: Regulatory Information

    (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 4: Safety Instruction

     The dome cover for indoor use shall be kept from rain and moisture.  Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 5 Transportation without the original wrapper may result in damage on the speed dome and lead to additional costs. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 6: Table Of Contents

    Others ................................34 3.7.1 Setting the language of the menu ......................34 3.7.2 Configuring Dome Authentication ......................35 3.7.3 Restoring Default Dome Settings.......................35 3.7.4 Restoring Default Camera Settings ......................36 3.7.5 Rebooting the Dome ..........................36 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 7: Chapter 1 Overview

    Label Display The on-screen label of the preset title, azimuth/elevation, zoom and other operations can be programmed by menu and displayed on the monitor. Auto Flip © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 8 Pattern A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions that can be © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 9 A zone is a user-defined area. The dome provides eight zones, each with configurable label. If the dome has dwelled at a zone without receiving any command over 4 minutes, this feature will enable © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 10 The baudrate of dome can be configured by the menu without need of DIP switch settings. Smart Tracking With the smart tracking function, the speed dome analyses the scene and tracks the targets. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 11: Chapter 2 Getting Started

    Please refer to Table 2.1 for details of the configuration. 2.2 Basic Operations You can operate the speed dome using a control device. The control devices include the control © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 12: System-Defined Presets

    Enable limit stops Note: For details about shortcut patrol, refer to the section 3.4.3 Configuring Patrols. For Manchester code control protocol, the system-defined presets with special functions are shown as below: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 13: On Screen Displays

    NE indicates the degrees in north east direction, while the XXX following T indicates the degrees in tilt position. Time: Display the current time. Preset Title: Display the preset being called. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 14: Chapter 3 Menu Operation

    PRESET PEED AE MODE WIDE LIMIT CLEAR LIMIT STOP CHROMA IRIS SETTINGS SUPPRESS <SETTING PASSWORD SHUTTER STOPS> SATURATION CLEAR STOPS GAIN ZONES CONTRAST ELEVATION EXPOSURE SMART COMP SETTINGS HR MODE GAIN LIMIT © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 15: Accessing And Operating The Menu

    On control panel of the live view interface of the DVR, you can click left and right direction buttons to turn page up or down. To change the value of a parameter: Steps: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 16: Configuring System Information

    3.2.2 Configuring System Parameters Purpose: You can check and also edit the system information of software address, baudrate, system time, etc. on the system information settings menu. Enter the system information settings menu: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 17 (1) Move the cursor to SYSTEM TIME using the direction buttons and click IRIS+ to enter. (2) Click the left/right direction buttons to position the cursor on the specific item (year/month/day or hour/minute/second) of which you want to change the value. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 18 You can set the 485CHECK SET as ON or AUTO for improving the controlling effect.  Power Off Memory You can set the duration of Power Off Memory as 30s, 60s or 180s for power off memory. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 19: Configuring Image Parameters

    You can set FOCUS LIMT as 1CM, 30CM, 1M, 3M or AUTO. Note: The focus limit value varies depending on the models of speed dome. Task 2: Configure the iris, gain and shutter speed.  Setting the AE mode Purpose: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 20  Setting the zoom limit Purpose: Zoom limit is a user-defined limitation of the zoom amount. Steps: (1) Move the cursor to ZOOM LIMIT using the direction buttons and click IRIS+ to enter. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 21 You can set the BLC/WDR value as ON or OFF to enable or disable the function. BLC LEVEL: You can manually adjust the backlight compensation level. Note: BLC level configuration varies depending on the model of the speed dome. Some models don’t support BLC LEVEL function. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 22 In SELFDEF mode, you need to adjust the RED and BLUE values manually. ATW: In auto-tracking mode, white balance is continuously being adjusted in real-time according to the color temperature of the scene illumination. HAUTO: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 23: Configuring Privacy Mask

    (1) Move the cursor to SET BLANK and click IRIS+ button to enter the editing mode as shown in the following figure. You can see a privacy mask on the live window. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 24: Configuring Osd Settings

    5. Exit the MAIN MENUS interface. 6. On the live view screen, call preset 11 twice within 5 seconds to enter the SET TITLE menu, as shown in the following figure. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 25 After exit the SET TITLE menu, you can call preset 12 twice within 5 seconds to delete the defined title and remove it from the screen.  Display the PTZ movements, alarm, system time, etc. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 26: Configuring Ptz Control Parameters

    You can configure panning, tilting and zooming movements, and configure PTZ control functions including presets, patrols, patterns, etc. for the speed dome. 3.4.1 Configuring PTZ Parameters Enter PTZ configuration menu: MAIN MENUS > DOME SETTINGS > MOTION PARAMETER © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 27 It can also reduce the use of bandwidth in a digital network system. You can set IMAGE FREEZE on to enable this function.  PTZ speed Purpose: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 28: Configuring Presets

    A preset is a predefined image position. For the defined preset, you can simply click the calling button to view the desired image position. TASK 1: Set a preset. Steps: 1. Move the cursor to enter preset configuration submenu: MAIN MENUS > DOME SETTINGS > PRESETS © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 29 (4) Click IRIS+ to select the character from the letter/number/symbol list to the label. (5) Click FOCUS+ to exit the character lists and click IRIS+ again to confirm and exit the submenu. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 30: Configuring Patrols

    (2) Click the up and down direction buttons to select the number of the patrol which is to be configured. (3) Click IRIS+ again to confirm and exit edit mode of this column. Note: You can configure up to 8 patrols. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 31 Task 3: Delete a patrol. You can move the cursor to CLEAR PATH and click IRIS+ to delete the current patrol. Task 4: Call the defined patrol. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 32: Configuring Patterns

    (3) Click IRIS+ again to confirm. Note: You can configure up to 4 patterns. 3. Edit the pattern. Steps: (1) Move the cursor to EDIT PATTERN and click IRIS+ to enter edit mode. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 33: Configuring Time Tasks

    DVR through a web browser, and click the arrow to call the related pattern. E.g. call preset 41 to call pattern 1. Please refer to Section 2.3 to find the corresponding preset number for each pattern. 3.4.5 Configuring Time Tasks Purpose: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 34 (2) Click the left and right direction buttons to position the cursor to WEEK, START (H-M) and END (H-M). (3) Click the up and down direction buttons to select the specific day and time. (4) Click IRIS+ to confirm and exit. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 35: Configuring Zones

    You can also set the speed dome to scan in a zone automatically after a period of inactivity. Task 1: Set a zone. Steps: 1. Move the cursor to enter the zone configuration submenu: MAIN MENUS > DOME SETTINGS > ZONES © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 36: Clearing Ptz Control Settings

    You can clear all user-defined PTZ control settings, including presets, patrols, patterns, zones and time tasks. You can also clear privacy masks on this menu. Steps: 1. Enter the CLEAR SETTINGS menu: MAIN MENUS > DOME SETTINGS > CLEAR SETTINGS © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 37: Configuring Smart Settings

    4. Move the cursor to ZOOM RATIO and click FOCUS+ to change the cursor to hollow. 5. Click the PTZ buttons to get a scene you want. The speed dome tracks according to the zoom ratio you set. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 38: Configuring And Handling Alarms

    (2) Click the up and down direction buttons to select the number of the alarm which is to be configured. (3) Click IRIS+ again to confirm and exit edit mode of this column. Note: You can configure up to 7 alarms. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 39: Configuring Alarm Parameters

    You can set ALARM RESUME to ON to enable the speed dome to resume its previous activity after the triggered actions finished. Notes:  If the speed dome is moving when a linkage action is triggered, it will stop at the current © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 40: Configuring Auxiliary Alarm Output

    AUX 2. 3.7 Others 3.7.1 Setting the language of the menu Enter MAIN MENUS > LANGUAGE, you can set the language of the on-screen display menu in Chinese or in English. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 41: Configuring Dome Authentication

    Click IRIS+ to restore the dome settings to the default value as shown in below table; or click IRIS- to exit. Table 3-2 Default Dome Settings Parameters Default Value Dome address Baudrate 2400bps © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 42: Restoring Default Camera Settings

    Note: Camera settings include the image parameters, lens settings and display settings. 3.7.5 Rebooting the Dome Enter MAIN MENUS > REBOOT DOME and click IRIS+ to reboot the speed dome remotely. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 43 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

Table of Contents