Advertisement
Quick Links
Advertisement
Related Manuals for Black & Decker GKC1820L-XE
Summary of Contents for Black & Decker GKC1820L-XE
- Page 1 Australia New Zealand GKC1820L-XE...
-
Page 4: Intended Use
ENGLISH Intended use If operating a power tool in a damp location is English unavoidable, use a Residual Current Device (RCD) Your Black & Decker Compact Chainsaw has been designed protected supply. Use of an RCD reduces the risk of for light duty cutting and pruning. - Page 5 ENGLISH when performing an operation where the cutting d. Store idle power tools out of the reach of children tool may contact hidden wiring or its own cord and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Contact with a "live"...
- Page 6 ENGLISH materials. Use of the chainsaw for operations different Always remove the battery from the tool and place the than intended could result in a hazardous situation. chain cover assembly over the chain when storing or Position the cord so that it will not get caught on transporting the tool.
-
Page 7: Warning Symbols
ENGLISH Safety of others Maintain your chainsaw when not in use. Do not store your chainsaw for any length of time without first This appliance is not intended for use by persons removing the saw chain and guide bar which should be (including children) with reduced physical, sensory or kept immersed in oil. - Page 8 ENGLISH Chargers Warning! Your charger has been designed for a specific Beware of falling objects. voltage. Always check that the mains voltage Keep bystanders away. corresponds to the voltage on the rating plate. Warning! Never attempt to replace the charger unit with To ensure continued safe operation, check the a regular mains plug.
- Page 9 ENGLISH Assembly Leaving the battery in the charger The charger and battery pack can be left connected Warning! Before assembly, remove the battery (10) from the indefinitely with the LED lit. The charger will keep the tool. battery pack fresh and fully charged. Fitting and removing the battery (fig.
- Page 10 ENGLISH Adjust the chain tension as described below. Checking and adjusting the chain tension (fig. C and E) Switching on and off (fig. G) Check the saw chain tension. The tension is correct Warning! Let the tool work at its own pace, Do not overload. ...
-
Page 11: Cleaning, Maintenance And Storage
ENGLISH Saw chain tension First cut one third up to avoid splintering and second, cut down to prevent splintering. Regularly check the saw chain tension. When on a slope: What to do if your chainsaw needs repair. Always stand on the uphill side. ... - Page 12 Batteries are recyclable. Place the battery(s) in a suitable packaging to ensure that the terminals cannot be short- circuited. Take them to any authorised repair agent or a local recycling station. Technical data GKC1820L-XE H1 Voltage Vdc 18 No load chain speed Weight kg 2...
- Page 16 Australia & New Zealand Stanley Black & Decker 82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 444 224 (Aust) or Tel. 0800 339 258 (NZ) 90582903 03/2012...