Wireless-G Broadband Router with 2 Phone Ports
The Wireless Tab - Wireless Network Access
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network's radius.
MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable. If you do
not wish to filter users by MAC Address, select Disable.
Deny. Clicking this button will block the wireless access by MAC Address.
Allow. Clicking this button will allow the wireless access by MAC Address.
Select MAC Address from Networked Computers. Clicking this button will open the Wireless Client MAC List.
On this screen, you can view users, by MAC Address, to whom you wish to provide or block access. To enable
MAC filtering for a specific computer, click the Enable MAC Filter checkbox. When you have finished your
changes, click the Save button. Click the Cancel button to cancel your changes. To update the information on the
Wireless Client MAC List, click the Refresh button.
Figure 5-18: Wireless Tab - Wireless Network Access
When you have finished making changes on this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. Help information is shown on the right-hand side of a
screen. For additional information, click More.
Figure 5-19: Wireless Client MAC List
25
Chapter 5: Configuring the Wireless-G Broadband Router with 2 Phone Ports
The Wireless Tab - Wireless Network Access