The 4-Port Router's Front Panel Leds - Linksys EtherFast BEFSR11, BEFSR41 User Manual

The 4-Port Router's Front Panel LEDs

The LAN Indicators
Power
Link/Act
Full/Col
100 or 10/100
4
Green. The Power LED illuminates when the Router is pow-
ered on.
Green. The Link/Act LED serves two purposes. If the LED
is continuously illuminated, the Router is successfully con-
nected to a device through the corresponding port (1, 2, 3
or 4). If the LED is flickering, the Router is actively send-
ing or receiving data over that port.
Green. The Full/Col LED also serves two purposes. If this
LED is continuously illuminated, the connection made
through the corresponding port is successfully running in
Full Duplex mode. If the LED is flickering, the connection
is experiencing collisions. Infrequent collisions are normal.
If this LED is flickering too often, there may be a problem
with your connection. Check the Troubleshooting section on
page 30 if you think there is a problem.
Orange. The 100 LED illuminates when a successful
100Mbps connection is made through the corresponding
port.
Instant Broadband Series