Linksys WUSB54G Quick Installation Manual page 2

3 PSK + RADIUS
Select the authentication method
you want to use, EAP-TLS or EAP-PEAP .
EAP-TLS
a Enter the login name in the
Login Name field.
b Enter the name of the
authentication server in the
Server Name field.
c From the Certificate drop-
PSK + RADIUS
down menu, select the
EAP-TLS
authentication certificate.
d Select the encryption method
you want to use, TKIP or AES.
e Click Next, and go to Step H.
EAP-PEAP
a Enter the login name in the
Login Name field.
b Enter the password in the
Password field.
c Enter the name of the
authentication server in the
PSK + RADIUS
Server Name field.
EAP-PEAP
d From the Certificate drop-
down menu, select the
authentication certificate.
e Select the encryption method
you want to use, TKIP or AES.
f Click Next, and go to Step H.
4 RADIUS
Select the authentication method
you want to use, EAP-TLS or EAP-PEAP .
EAP-TLS
a Enter the login name in the
Login Name field.
b Enter the name of the
authentication server in the
Server Name field.
c From the Certificate drop- RADIUS
down menu, select the
EAP-TLS
authentication certificate.
d Click Next, and go to Step H.
EAP-PEAP
a Enter the login name in the
Login Name field.
b Enter the password in the
Password field.
c Enter the name of the
authentication server in the
RADIUS
Server Name field.
EAP-PEAP
d From the Certificate drop-
down menu, select the
authentication certificate.
e Click Next, and go to Step H.
H
The Setup Wizard will ask you to
review your settings before it
starts to copy files. Click Next to
save these settings, or click
Back to change any settings.
I
If you are using Windows 2000,
you may see a screen
indicating that a digital
signature was not found. This
H
software has been tested and
works properly with Windows
2000. Click the Yes button.
J
After the software has been
successfully installed, the
Congratulations screen will
appear. Click Exit.
I
J
2
Connect the Wireless-G USB
Network Adapter
A
Connect one end of the
included USB cable to the USB
port of the Adapter.
B
Connect the other end to a
USB port on your PC. When the
Adapter is plugged in, the
A
Power LED should light up.
C
If you are using Windows 2000,
you may see a screen
indicating that a digital
signature was not found. This
software has been tested and
D
works properly with Windows E
2000. Click the Yes button.
D
Raise the antenna. It should
point straight up into the air, at
a 90º angle from the Adapter. For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
E
ROM. You can also call or e-mail for further
After the Adapter is installed,
support.
the Wireless Network Monitor
icon will appear in the system
24-hour Technical Support
tray at the bottom right-hand
800-326-7114
corner of your screen.
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Double-click the icon if you
Website
want to check the link
http://www.linksys.com or
information, search for
http://support.linksys.com
available wireless networks, or
RMA (Return Merchandise Authorization)
make additional configuration http://www.linksys.com/support
FTP Site
changes.
ftp://ftp.linksys.com
Sales Information
Congratulations! The installation of
800-546-5797 (800-LINKSYS)
the Wireless-G USB Network Adapter
is complete.
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
WUSB54G_V4-QI-40816A BW