Back Panel - Cisco ISB7000 Series Installation Manual

Back Panel

TO WALL
(VIDEO IN)
1
1 To Wall (Video In)
2 To TV (Video Out)
3 Network
4 eSATA Port
5 YPbPr
6 S-Video
7 Video Out
8 Audio Out (L/R)
9 Optical
10 HDMI
11 USB Port
12 Power
Note: This illustration may vary from the actual product.
TO TV
(VIDEO OUT)
NETWORK eSATA
2 3 4
Connect the set-top to in-house coaxial wiring, if applicable. (optional)
Connect to TV. You must set the channel on your TV to the channel
designated by your service provider (usually channel 3). Contact your
service provider for the channel information (optional)
Connect to the Ethernet (CAT-5) network at your home, if applicable
Connect external SATA equipment approved by your service provider
to this port (optional)
Connect the set-top to the component video input (YPbPr) on your
HDTV or SDTV. See pages 15 and 16 for more information
Connect an S-Video cable to send an S-Video signal to your TV, VCR, or
DVD recorder. This signal is standard-defi nition but higher quality than
other standard-defi nition TV connections. See page 17 for more
information (optional)
Connect to composite input on your HDTV or SDTV
Note: Two video output connectors are provided. Typically, one output
is connected to the TV, and the other output is used to connect to a
home theater system, DVD recorder, or VCR
Connect RCA-type cables to Audio Out to send analog audio signals
(left and right) to a TV with stereo inputs or to a stereo amplifi er.
Note: Two sets of audio out connectors are provided. Typically, one set
of outputs is connected to the TV, and the other set is used to connect
to a home theater system, DVD recorder, VCR, or wireless headphones
Connect an optical cable to send a digital audio signal to a surround-
sound system or other digital audio device
Connect an HDTV HDMI
from the HDTV to the HDMI port. HDMI supports both digital audio and
video. See page 15 for more information
Connects to external USB equipment approved by your service
provider (optional)
Connect the DC output of the AC power adapter (provided) to deliver
power to the set-top. Use only the AC power adapter provided with
the set-top
Pb Y
L
Pr
VIDEO AUDIO
S-VIDEO
OUT OUT
5 6 7 8
™ (High-Defi nition Multimedia Interface) cable
R
OPTICAL USB
10
9 11
POWER
12
T14256
9