Table of Contents
Advertisement
User Password Tab
From the User Password tab, shown in Figure 5-5, any user can change their
password for interacting with the Instant GigaDrive's web-based utility. To do
this, enter your User Name in the User Name field. This should be the same as
your network logon. Then, enter the password you use when accessing the
Instant GigaDrive's web-based utility. Next, enter a new password. This new
password can be up to 15 hexadecimal characters long. Enter this new password
again in the Confirm New Password field and click the Save button to save
this new password.
To cancel this procedure and clear all the fields, click the Cancel button. For
further information about anything on this screen, click the Help button.
Administration Tab - LAN
When you click the Administration tab, a password request window will
appear, as shown in Figure 5-6. (Windows XP users will see a Connect to win-
dow.) Enter the User Name and Password you use to access the Instant
GigaDrive™ and click the OK button.
19
Instant GigaDrive
Figure 5-5
Series
EtherFast
TM
®
If you have not already assigned
an administrative user name and
password for the Adminstrator,
you can enter the default user
name of Administrator. There is
no password by default. Then,
you can set the Administrator's
user name and password from
the Administrator tab, under
Users. To cancel the login pro-
cedure, click the Cancel button.
After logging in, you will see the Administration tab's LAN screen, shown in
Figure 5-7. This is the default screen that appears whenever you log in to the
Administration tab.
Network Attached Storage
Figure 5-7
Figure 5-6
20
Advertisement
Table of Contents
