Instructions For Connecting To A Wired Network; Figure 3-2: Connect The Ethernet Network Cable - Linksys WMCE54AG User Manual

Dual-Band Wireless A/G Media Center Extender

Instructions for Connecting to a Wired Network

1. Connect the included Ethernet network cable from the Extender's Ethernet port to an
Ethernet network port on your Media Center PC, router, or switch.
2. The Extender's Ethernet port includes an LED in one corner. It will light up when the Extender
has successfully joined your wired network.
If the LED does not light up, push the Extender's Ethernet X-II button on the back panel.
3. Proceed to the "Instructions for Connecting the Extender" section.
12

Figure 3-2: Connect the Ethernet Network Cable

Chapter 3: Connecting the Media Center Extender
Instructions for Connecting to a Wired Network