Table of Contents
Advertisement
BASEBAND OVERVIEW
6.2.6 Real Time Clock
The Real Time Clock (RTC) and Alarm function is provided by U604 running at 32,768 MHz. It interfaces to the CPU via a four
serial lines: CE (chip enable), SCLK (serial clock), SI (serial input) and SO (serial output). To maintain power to the clock when
the main battery is removed, a small rechargeable back-up battery (VBACKUP) is used. This power source also provides power
back-up for data held in the SRAM.
The RTC can be calibrated using a high-precision oscillation adjustment function. This gives a maximum adjustment range of
±189.2 ppm in increments of 3 ppm. Addition functions of the RTC are date, alarm, periodic interrupt, 32 kHz output, supply
voltage monitoring and oscillation halt sensing.
6.2.7 Microphone
To provide improved speech pick-up, noise immunity and reduced echo, the microphone is a noise cancelling type. The GSM
standard requires that when in Handheld mode the sending audio frequency response must fit within the mask shown below.
dB
-5
-10
-15
When using the Handsfree feature GSM requires that the sending audio frequency response must fit within the mask shown
below.
dB
-5
-10
-15
Issue A
Revision 0
http://cxema.ru
5
0
100
Figure 6.4: Handheld GSM Transmit Audio frequency response mask
5
0
100
Figure 6.5: Handsfree GSM Transmit Audio frequency response mask
1000
Frequency (Hz)
1000
Frequency (Hz)
Section 6
– 28 –
10000
10069-1
10000
10070-1
MCUK990801G8
Technical Guide
Advertisement
Table of Contents
