Makita BO4553 Instruction Manual
Finishing sander
Hide thumbs
Also See for BO4553:
- Instruction manual (37 pages) ,
- Instruction manual (33 pages) ,
- Instruction manual (21 pages)
Related Manuals for Makita BO4553
Summary of Contents for Makita BO4553
- Page 1 INSTRUCTION MANUAL Finishing Sander BO4553 BO4561 BO4563 004429 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model BO4553 BO4561 BO4563 Pad size 116 mm x 104 mm 112 mm x 190 mm 100 mm x 164 mm Orbits per minute (min 14,000 14,000 14,000 Dimensions (L x W x H) 120 mm x 112 mm x 137 mm... - Page 3 (RCD) protected supply. Use of an RCD reduces starting the power tool accidentally. the risk of electric shock. 21. Store idle power tools out of the reach of 10. Use of power supply via a RCD with a rated children and do not allow persons unfamiliar residual current of 30mA or less is always with the power tool or these instructions to recommended.
-
Page 4: Functional Description
Then press the punch plate to make holes in the paper. Models BO4561 and BO4563 004431 NOTE: CAUTION: Use Makita hook-and-loop sandpaper with this sander. Before plugging in the tool, always check to see • that the tool is switched off. 1. Velcro To start the tool, press the "ON ( I )"... - Page 5 Installing paper dust bag (optional accessory) 1. Velcro sandpaper 1. Groove 2. Base 2. Front fixing cardboard 3. Front side of paper dust bag 004514 To attach the sandpaper: 003742 Set the tool upside down so that the pad is on top. Place the paper dust bag on the paper dust bag holder Position the sandpaper to fit the shape of the base.
-
Page 6: Operation
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding 004442 these accessories, ask your local Makita Service Center. Abrasive paper (without pre-punched holes) • Paper dust bag • Paper dust bag holder •... - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884003G226...