Accessories; Maintenance; Troubleshooting - Black & Decker LSW36 Instruction Manual

MAINTENANCE

CLEANING AND STORAGE
warning: shock hazard. do not pour or spray
water on the tool in an attempt to clean.
caution: turn off and remove battery from tool.
Use only mild soap and a damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the tool into a
liquid. Your Sweeper should be stored in a dry place.
Do not store the tool on or adjacent to fertilizers or chemicals. Such
storage can cause rapid corrosion of the metal parts.

ACCESSORIES

WARNING:
DO NOT use this product with any type of
accessory or attachment. Such usage might be hazardous.

TROUBLESHOOTING

Problem
• Unit will not turn on.
• Battery will not charge.
For assistance with your product, visit our website www.blackanddecker.
com for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.
9
Solution
• Check battery installation.
• Check battery charging
requirements.
• Insert battery into charger until
green LED appears.
• Plug charger into a working
outlet. Refer to "Important
Charging Notes" for more details.
• Check current at receptacle by
plugging in a lamp or other appliance.
• Check to see if receptacle is
connected to a light switch which turns
power off when you turn out the lights.
• Move charger and tool to a
surrounding air temperature of
above 40 degree F(4.5°C) or
below 105 degree F(+40.5°C).