Makita 6095D Instruction Manual page 9

Screwdriving operation
Place the point of the driver bit in the
screw head and apply pressure
to
the tool.
Start the tool slowly and then increase the
speed gradually.
Release
the trigger
as
soon
as
the clutch cuts in.
NOTE
:
Make sure that the driver bit
is
inserted straight in the screw head, or the screw and/or
bit may be damaged.
When driving wood screws, predrill pilot
holes to make driving easier and to pre-
(5/64"
-
3/32")
(3/32"
-
3/32")
vent splitting of the workpiece. See the
chart.
2.5
-
2.8
(3/32"
-
7/64")
2.9
-
3.2
(7/64"
-
1/8")
3.8 (5/32")
----I--
4.5 (11164")
3.1
-
3.4
(1/8"
-
9/64")
3.3
-
3.6
(1/8"
-
9/64")
4.8 13/16")
===I==
5.1 (13/64")
3.7
-
3.9
(9/64" -.5/32")
5.5 (7/32")
9