Getting Started - GoPro Hero3+ Silver User Manual

/ Getting Started

CHARGING THE BATTERY
Slim housing remove camera
1. Remove the camera from its housing.
2. Remove the camera side door and insert a microSD, microSDHC
or microSDXC card into the card slot. A microSD card with a Class
™
10 or UHS-1 rating is required.
3. Open the camera backdoor, insert the battery and close the
camera back door.
12
4. Be sure the camera is powered off.
Slim housing insert camera
5. Charge the battery by connecting the camera to a computer
The included lithium-ion battery comes partially charged. No damage
occurs to the camera or battery if used prior to a full charge.
For more battery information, see Battery.
™
using the included USB cable. The red status light turns on during
charging and turns off when the battery is fully charged.
WARNING: Use caution when using your GoPro as part of your
active lifestyle. Always be aware of your surroundings to avoid
injury to yourself and others. Abide by all local laws when using
this camera.
/ Getting Started
13