GoPro Hero3+ Silver User Manual page 16

/ Camera Settings
WIRELESS CONTROLS
The camera's built-in wireless allows your HERO3+ Silver to connect
to the remote (sold separately) or smartphone/tablet via the GoPro
App. When wireless is on, a wireless status icon appears on the camera
status screen and the blue wireless lights blink intermittently. When
you turn off wireless, the wireless status lights flash seven times.
To Turn Wireless On/Off:
Press the Wireless On/Off button [
most recently used wireless mode is active when wireless is turned on.
Note: Your camera cannot connect to the remote and the GoPro App at the same time.
30
] to turn wireless on/off. The
DELETE
Delete the last file or all files and format the memory card. Deleting all
files is useful after you transfer your files to your computer and want to
make room on your memory card for more content. LED lights blink
until the operation is complete.
NOTICE: If you select ALL, the memory card is reformatted, which
deletes every file on your card.
CANCEL (default)
LAST
ALL (Formats SD card)
To Delete LAST or ALL:
1. Verify that the camera is in the Settings mode. If the Settings icon
[ ] does not appear on your camera status screen, press the
Power/Mode button [ ] repeatedly until it appears.
2. Press the Shutter/Select button [
menu [ ].
3. Use the Power/Mode button [
locate the Trash [
].
4. Press the Shutter/Select button [
/ Camera Settings
] to enter the Settings
] to cycle through Settings to
] to enter Delete.
31