Audio Delay Control - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Troubleshooting
Surround sound effects When connecting this unit with playback Relier to the manual supplied with your component
are
insubstantial,
component and TV digitally, the output and check tile setting.
setting of tile playback component and TV
is not valid.
The playback component is set for constant Change tile playback component's audio output
output from 2 channels (PCM, etc.), setting.
The listening room is not a regular shape, Relocate the unit or listening position.
or the unit or listening position is not at the 14
center of tile right and lel: wall of the
listening room.
There is no wall in tile path of the sound Try placing a flat object, such as a board, in the path
beam. of tile sound beam.
When My SmTonnd is selected, listening Listen in fl'ont of this unit.
37
position is not in fl'ont of tile unit.
No sound from the The subwoofer is not colmected wirelessly. Check if the LINK indicatnr on tile back of the 20
subwoofer.
S tl[_r _)_' _"
lights.
When tile indicator does not light, check tile 21
subwoolier, center unit. and Y1T-WI2TX are
assigned the same group 1D.
The vohm/e of the subwoofer is low. Increase the volume of the subwnnlier with tile
32
SUBWOOFER + key.
The volume of low Content from an input source with a limited Play content fi'nm an input source with broader
(bass) tones from the
support lor low tones is playing, support for low tones to see if vnhnne is still low.
subwoofer is low. Mnve or repnsition tile subwoofer. 11
The
image is not
Connect the HDMI cable properly.
18, 19
The HDMI cable is not securely connecled.
displayed on TV screen.
Menu screen of this unit The iPnd CONTROL key' was pressed Press tile iPod CONTROL key again to display the
is not displayed,
duriug iPnd operation with the input source playback or Browse screen on the TV. 49
set to LISB.
The input switch ol TV is nnl set correclly. Set tile TV's input source lo fllis unit. 21
A digital
or The unit may be placed close Io digital Move the equipment avv'ay fi'om the unit.
high-frequency
equipment or high-frequency equipment.
equipment produces
noises.
The HDMI control "HDMI CONTROL" is set to "OFF". Set "HDMI CONTROL" tn "ON". 63
function does
not work
The HDMI control fuuclion is disabled on Refer tn the manual supplied with your TV and
properly, your TV. check tile setting.
The number of the connecled HDMI Disconnect some ol tile HDMI components.
components exceeds tile limit.
Audio delay
control
The TV does not support the audio delay Adjusl timing of sound output malmally from
function is not effective auto adjustment feature. "AUDIO DELAY" in tile optinn menu.
even "AUDIO DELAY" is
43
set to "AUTO".
"Disable" appears in
The key*is unable tn hmction in tile current
the front panel display
condition.
after key operation.
iiii il;i;iiiii_;il
ilii iiiili!i!i! _
:ii;ii_!_i_i II! . ...........
f
Z
69 En