Speaker Level - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Setup menu
BEAM
AUX
SPEAKER LEVEL
Adjust the volume of each channel to balance output levels. Use
test sounds output from each channel to adjust volume for
opti mal balance./}
Sub menu: Front L, Front R, Center, Surround k,
Surround R, Subwoofer
Adjustable range: -20 to +20
Adaptive DRC 2)
Adjust this tmit's volume and dynamic range 3} for optimal
balance. When "ON" is selected, dynamic range is adjusted as
follows for optimal listening at low' volumes, such as might be
used at night.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and
soft sound which is hard to be listened to is played back louder.
When the volume level is high:
Widen the dyuamic rauge. For both soft aud loud sounds, source
sound is played back without adjusting volume.
ca
Off
lnpul level Input level
Volume: low Volume: high
Selectable item: ON*, OFF
"ON": Adjust the dynamic range automatically.
"OFF": The dynamic range is not adjusted automatically.
When the sound beam output method is set to "MY SUR." (My
Surround) with the BEAM key, the following items can be configured.
Sub menu: Center, Surround L/R, Subwoofer
2} :(_
• When sel to "ON", "DYNAMIC RANGE" is automatically sel to
"Max".
• This selling is not available when the UniVolume funclion is enabled.
62
En