Sony PCS-G70 Setup Manual

Hide thumbs Also See for PCS-G70:

Download this manual See also: Function Manual, Operating Manual

Revolabs Fusion

This setup guide will guide you through the steps needed to properly connect a

Revolabs Fusion Microphone System to a Sony PCS-G70 video codec.

It is important to carefully follow these instructions in order and completely.

Note:

Otherwise your Fusion Microphone System and/or the video codec may not function

properly. Please read through these instructions completely before proceeding.

Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1. Revolabs Fusion 4 or 8 channel Microphone System

2. Sony PCS-G70 video codec

3. QTY 1 Female XLR—1/8" mono male cable* (i.e. Calrad 10-144)

4. QTY 1 RCA male — RCA male cable

5. Amplified Speakers

* Optional Item

Microphone System — Sony PCS-G70 Setup Guide

Page 1 Microphone System — Sony PCS-G70 Setup Guide This setup guide will guide you through the steps needed to properly connect a Revolabs Fusion Microphone System to a Sony PCS-G70 video codec. It is important to carefully follow these instructions in order and completely.
Page 2 1. Connect a Female XLR – 1/8” audio cable between the XLR “CONF OUT” port on the Fusion and the “MIC 1” port on the PCS-G70. 2. Connect a Male RCA-RCA audio cable between the “CONF IN” port on the Fusion and the non-mixed “AUDIO OUT”...
Page 3 5. Select ECHO CANCELLER to OFF 6. Save settings 7. Increase Sony codec volume to maximum on remote control NOTE: You must use your Fusion remote control to control the room volume for both the audio and video conference calls. Adjusting the volume in the...

Revolabs fusion pcs-g50