Safety Instructions - Cisco TelePresence SpeakerTrack 60 Installation Manual

Safety instructions

WaRnIng: Use Ethernet cable only when connecting to the Ethernet port on the
camera. Do not connect a serial VISCA cable to the Ethernet port on the camera, as
this will cause severe damage to the camera.
note: It is of great importance that the wall mount unit is safely installed, that the wall is able to
support the product and that the screws or mounting means used are suitable for the wall and
the weight of the product.
note: According to the relevant international safety standard for IT products the wall is required
to support four times the actual load, which implies that the SpeakerTrack 60 must be mounted to
a wall which supports at least: 4 × 11.25 kg = 45 kg (4 × 24.8 lbs = 99.2 lbs).
note: This type of equipment is to be installed by the submitter's/dealer's qualified installer.
The installer is responsible for obtaining safety inspection of the structural integrity of the
installation by the local authority/inspection department.
note: Note that the surface is hot when the camera is in operation.
78-100223-02C0 | MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.