Mounting The Base Unit - Cisco TelePresence SpeakerTrack 60 Installation Manual

Mounting the base unit

Place the microphone panel (B) on a clean and stable surface (for example a table) with the
microphone cables headed up and the textile headed down.
Use the four pan headed screws (P) when fastening the base unit.
Use the Torx Key (M) and tighten the screws.
78-100223-02C0 | MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Remove the cover plate (a) from the base unit before this
operation. Hold the base unit (d) as illustrated and slide in
place. Make sure the guide-pins positions correctly.
Use the supplied
gloves (l).