Programming Your Thermostat; Setting The Current Time/Day; Entering The Program Schedules; Setting The System And Fan Controls - Honeywell SuperStat User Manual

P Y
ROGRAMMING OUR
Step 1
When pressing the keys, use your finger or a soft pencil eraser. Using sharp fingernails or pencil points
can damage the keypad. If you make a mistake during programming, press the
reprogram the time and temperature.
Step 1.

Setting the current time/day.

Press the or keys until the current time is displayed. To set the day, press and release the
ahead back
key again. Press the
clock/day
the time and day, press the
Step 2.

Entering the program schedules.

heating and cooling schedules and proceed as follows: Press the
the word to indicate you are in the heating/cooling mode. Press and release the
heat/cool
key once. The words
wake, mon...fri,
weekday wake time from your personal programming charts. Press the
weekday wake temperature from your personal programming charts. Repeat the above sequence for the
other weekday schedules,
and appear on the display. Set the
set
as a weekday schedule.
.
Step 3

Setting the system and fan controls.

as follows: If you have a conventional heating/cooling system, the system can be set to
If you have a heat pump, it can be set to
You can change the system setting by pressing the
key, the system status changes to the next setting. The system status is as follows when the associated
indicator is displayed:
®
Austin Energy
T
HERMOSTAT
Step 2
To set the time, press and release the
or keys until the current day is displayed. After you have set
ahead back
key.
run program
Refer to your personal programming charts on page 3 for your
and appear on the display. Press the
set
leave, return, and sleep. Press the
wake, leave, return,
After programming the thermostat, set the system and fan controls
heat, em. heat, cool,
Step 3
set clock/day
key until the thermostat displays
system
ahead
warmer/cooler
key once so that
weekend schedule
and times by following the same instructions
sleep
or off.
key. Each time you press the
system
4 Call toll-free at 1-877-549-2774
Step 4
key and
run program
key once.
set
weekday schedule
or keys to set the
back
keys to set the
run, wake,
or .
heat, cool, off
system
Run
Program
Set
Clock/Day
Ahead
Back
Run
Program
System
Weekday
Schedule
Ahead
Back
Warmer
Cooler
Weekend
Schedule
System