Editing A Movie's First And Last Scenes - Canon EOS M Instruction Manual

X Editing a Movie's First and Last Scenes
You can edit out the first and last scenes of a movie in 1-sec.
increments (except for video snapshots).
1
On the movie playback screen,
select [X].
X The editing screen will be displayed.
2
Specify the part to be edited out. Specify the part to be edited out. Specify the part to be edited out.
Select either Select either [ Select either [U] (Cut beginning) or
[V] (Cut end), then press <Q/ ] (Cut end), then press < ] (Cut end), then press <
0>.
3 3
Tap [3]/[6] to see the previous or ]/[ ]/[6
next frame. Tap and hold down [ next frame. Tap and hold down [3]/ next frame. Tap and hold down [
6 6
[ [ [6] to fast forward the frames. ] to fast forward the frames. ] to fast forward the frames.
After deciding which part to edit out, After deciding which part to edit out, After deciding which part to edit out,
press <Q/0>. The portion press < press <
highlighted in gray on the top of the
screen is what will remain.
3
Check the edited movie.
Select [7] and press <Q/0> to
play the portion shown in gray.
To change the editing, go back to step
2.
To cancel the editing, press the
<M> button, select [OK] on the
confirmation dialog, then press <Q/
0>.
U
[U ] (Cut beginning) or ] (Cut beginning) or
6
241